Job Requirement:

1. Master degree in Electrical Engineering, Electromagnetic field or Microelectronics.
2. Solid background on transmission line theory.
3. Familiar with 3D high frequency simulation tools, such as HFSS and CST.
4. Familiar with circuit simulation tool such as ADS.
5. Familiar with lab measurements using oscilloscope, TDR, VNA and Spectrum Analyzer.
6. Fluent English in speaking and writing.
7. RF, SI or HW intern experience is a plus.

Job Description:

1. Signal integrity modeling and simulation of high speed systems, including chip packages, PCB, ceramic and system interconnects.
2. Cooperate with hardware engineers on high speed optical transceiver circuits design and analysis.
3. Debug and analysis RF related issues encountered in product design.

Job Requirement:

1. Masters in electronics, electrical engineering, optical communications, communication system, or a related field.
2. A strong technical education background in high speed circuit or optical communication is desirable.
3. Experience in high speed circuits design and simulation is a plus.
4. Familiar with schematic and PCB layout design and tools is a plus.
5. Self-motivated, strong problem-solving capabilities and analytical skills.
6. Good written and oral communication skills in English.

Job Description:

1. Participate in hardware design of new transceiver products.
2. Solve hardware related technical problems.
3. Support NPI and manufacture team on transceiver problem analysis and solving.

Job Requirement:

1. Bachelor’s degree is a minimum, Master or above is preferred, in Electrical Engineering, Electro-optics, Physics or Communications.
2. Design & debug ability as a Hardware engineer demonstrated from project experience of graduation project or post-graduate study.
3. Excellent verbal and written communication skills in English are desired.
4. Must be self-motivated, and a good team player.

Job Description:

1. Primary responsibility is Design and Development of Fiber Optic transceiver modules, primarily 100 Gb/s – 200 Gb/s. This includes hardware analog & digital circuit and PCB design.
2. Take a technical leadership position in a team of engineers from R&D, Product Engineering and NPI to coordinate all technical aspects of the product design including mechanical, electrical, firmware and optical.
3. Help on cost reduction activities on PCB re-spin, new components introduction, yield improvement, test time and process optimization.

Job Requirement:

1. Bachelor’s degree is a minimum, Master or above is preferred, in Electrical Engineering, Electro-optics, Physics or Communications.
2. Design & debug ability as a Hardware engineer demonstrated from project experience of graduation project or post-graduate study.
3. Excellent verbal and written communication skills in English are desired.
4. Must be self-motivated, and a good team player.

Job Description:

1. This person will join an established R&D team in Finisar Shanghai that has good track record of delivering high quality products supporting Finisar’s leadership position in the market.
2. Primary responsibility is Design and Development of Fiber Optic transceiver modules, primarily 100 Gbit/s – 400 GBit/s. This includes hardware analog & digital circuit and PCB design, some simulations and modeling, and characterization of optical and electrical performance.
3. Take a technical leadership position in a team of engineers from R&D, Product Engineering and NPI to coordinate all technical aspects of the product design including mechanical, electrical, firmware and optical.
4. Participate in co-development with teams in the US. Engage with customers for spec discussions, problem solving, and sometimes field visit. Some (not frequent) traveling to US/Europe/Asia customers needed.
5. Help on cost reduction activities on PCB re-spin, new components introduction, yield improvement, test time and process optimization.

Job Requirement:

1. Bachelor or master degree with optical engineering related background.
2. Good knowledge and experience of optical design for communication system.
3. More than 3 years’ hands-on experience of R&D in optical communication industry.
4. Profound understanding of active components including high speed laser and photodiode are preferred.
5. Self-motivated, team work spirit, Good oral and writing English.
Job Description:

1. Optical system design and verification for parallel transceiver.
2. Optical simulation for mechanical & process tolerance analysis of transceiver.
3. Solve optical system related problems during module manufacturing.
4. Hands-on transceiver optical spec characterization, link budgets design and verification.

Job Requirement:

1. Master degree holder in Physical, Optical or related engineering discipline.
2. Good knowledge of basic physical theory and optical design etc.
3. Good oral and writing English, at least CET-6 English level.
4. Good hand on and strong practical and learning ability, self-motivated and good team player.
5. Willing to oversea travel for globe projects transfer/support.

Job Description:

1. Responsible for advanced assembly manufacture platform development.
2. Responsible for advanced assembly platform roadmap development.
3. Carry out TOSA high volume manufacture platform development and implement.
4. Support new fiber optical assembly package capability adding.

Job Requirement:

1. Master degree holder or above in Optics, Materials, Physics or related engineering discipline.
2. Good oral and writing English, at least CET-4 English level.
3. Good hand on and strong practical and learning ability, self-motivated and good team player.
4. Willing to travel for globe projects transfer/support.

Job Description:

1. Responsible for Parallel product process development and transfer.
2. Responsible for new process technology investigation.
3. Responsible for continuous cost reduction solutions
4. Product yield management, defect analysis & improvement plan.

Job Requirement:

1. BS or MS degree with optical design related or mechanical design and automation related, or material background.
2. High curiosity in new technologies and new ideas.
3. Good communication skills and self-motivation.
4. Interested in design work, make it into product, verify your ideas and make improvement.
5. Optical design, mechanical design or material design project experience is a strong plus.
6. If optical background, Zemax or other optical design software should be familiar.


Job Description:

1. Lots of company training and team training courses will help you familiar with your job after you are on board, then you’ll be capable of.
2. Design and develop high volume optical transceiver products, try new kinds of lens, fiber assembly design.
3. Work closely with other design groups, support the team by providing appropriate design reviews, committing to development schedules, and meeting project milestones.
4. Release and maintain drawings per established engineering order process.
5. Work with process engineers, production, supply chain and various suppliers to achieve acceptable yields/costs and ensure manufacturability.

Job Requirement:

1. BS or higher in electrical engineering related major.
2. Better to know of and use one of PCB design tools like PADS, Allegro etc.
3. Better to have PCB design experiences and know something about PCB manufacturing.
4. Self-motivated, hard-working, capable of completing assignments under the pressure of urgent schedule and high design requirement.
5. Good English communication skill.


Job Description:

1. Responsible for PCB layout designs of RF, high speed analog and/or digital circuit boards using PADS Layout.
2. Work closely with design engineers to ensure that circuit requirements are well defined and incorporated into the board design.
3. Generate Gerber and drill files, fabrication drawings and assembly drawings.
4. Use PCB-aided tools to inspect and verify the designs.
5. Perform PCB design peer reviews per internal checklist.
6. Attach documents to file system after peer review is done.
7. Work in close cooperation with suppliers to make highest-quality products, reply engineering questions suppliers send.

Job Requirement:

1. BS or higher in electrical engineering and/or computer science/engineering or related area.
2. Knowledge in embedded systems and hands-on experiences in developing micro-controller firmware.
3. Familiar with the I2C, SPI interface protocols.
4. Experiences in the following areas would be added advantages.
5. Fiber optic transceiver technologies and MSA standard.
6. Knowledge in firmware quality assurance, testing and validation methodology.
7. Board level hardware design knowledge.
8. GUI or application software development.
9. Strong analytical and trouble shooting skills. Proficient in using test and measurement equipment such as oscilloscopes, logic analyzer etc.
10. Good verbal and written communication skills.
11. Must be a good team player, self-motivated and able to work independently.


Job Description:

1. Take part in the design, development, and test of the embedded firmware/software for high performance optical transceivers.
2. Deliver the firmware package per project development schedule and responsible for in-circuit test, PCBA bring-up, and system level debugging.
3. Work with Finisar global firmware/software organization and follow the Finisar processes of firmware/software architecture, development, debugging, optimizing, and validation.
4. Collaborate with functional teams such as marketing, transceiver engineering, product engineering, and customer support to complete the whole process of the product life cycle.
5. Support Finisar Shanghai site new product development and existing product sustaining engineering with micro-processors.
6. Work with teams on other sites worldwide as part of the global software/firmware support.

Job Requirement:

1. MS or higher in automation, mechatronic engineering or computer science/engineering.
2. Knowledge in automation systems and hands-on experiences in developing software.
3. Familiar with the C, VC, C# language.
4. Preferred with experience in motion control, machine vision, data management and DAQ& GPIB application.
5. Preferred with experience in SQL database.
6. Hands-on experience of software system development and implementation.
7. Self-motivated, thorough, and creative to understand new tools & technology.
8. A good team player with good communication & presentation in English.

Job Description:

1. Work with a group of mechanical, electric engineers to develop world-class high-tech automated system.
2. R&D, new product and manufacture automated application system related development and maintenance.
3. System integration between motion, vision, different testing equipment, etc.
4. Process and process automation equipment transfer.
5. Work with vendors or system suppliers for the automation projects, responsible for vendor sourcing and project review. Understand, analyze and resolve complex technical and functional problems.
6. Closely collaborate with Automation team in US for Automated system Co-development.

Job Requirement:

1. Master degree in Optics, Electro-optics, Physics or Electrical Engineering with strong optics and fiber optic background.
2. Ability to use optical simulation tools such as Zemax/Code V, and to analysis the system tolerance.
3. Knowledge of optical test solutions, and has the ability to do experiments and root cause analysis.
4. Excellent verbal and written communication skills in English is desired.
5. Must be self-motivated, and good team work spirit.

Job Description:

1. Design and develop new or custom designed OSA products.
2. Analyze customer and marketing technical requirements to meet new and specific customer needs.
3. Work with mechanical, electrical engineers to design the optical system.
4. Work with process engineer to test and verify the new products.
5. Help the vendor to improve their products to make sure its function could achieve all the designed spec.
6. Support the transfer of new designs to manufacturing, and resolve any technical design issues. Interact with the new product introduction group to assist in the introduction to manufacturing of new designs.

Job Requirement:

1. Master degree in Optics, Electro-optics, Physics or Electrical Engineering with strong optics and fiber optic background.
2. Good understanding the principle for the semiconductor laser and/or phase modulator.
3. Ability to use optical simulation tools such as Zemax/Code V, and to analysis the system tolerance.
4. Knowledge of optical test solutions, and has the ability to do experiments and root cause analysis.
5. Excellent verbal and written communication skills in English are desired.
6. Familiar with lab view will be an advantage.
7. Must be self-motivated, and good team work spirit.


Job Description:

1. Design and develop new or custom designed OSA products.
2. Analyze customer and marketing technical requirements to meet new and specific customer needs.
3. Work with mechanical, electrical engineers to design the optical system
4. Work with process engineer to test and verify the new products.
5. Help the vendor to improve their products to make sure its function could achieve all the designed spec.
6. Support the transfer of new designs to manufacturing, and resolve any technical design issues. Interact with the new product introduction group to assist in the introduction to manufacturing of new designs.

Job Requirement:

1. MS or above degree in EE/Engr. Physics or equivalent field.
2. Hands on lab debugging/measuring skills using oscilloscopes, communication analyzers, logic analyzers, etc.
3. Prior programming experiences with scripting languages such as Python, Perl, etc.
4. Must be self-motivated, effective team player able to thrive in a fast-paced engineering environment.
5. Strong analytical and problem solving skills; excellent verbal and written communication skills.
6. Experience with optical communication systems a plus.
7. Willingness to travel to Finisar Malaysia and Wuxi periodically.


Job Description:

As part of the R&D team, the successful candidate will work closely with design engineers and NPI PE during product research and development to characterize performance of cutting-edge optical transceiver/transponders and make sure smoothly and effectively transfer from prototype to mass production.
1. Definition of production process flow and test requirement.
2. Work with test engineers to develop test systems that will be used to test the optical transceivers/transponders once released into production.
3. Drive yield improvement and test time reduction at EVT, DVT and MVT phase.
4. Build and Agile release product BOM.
5. Build up necessary systematic procedure for mass production.
6. Interfacing with field application engineering team, understanding customer specific application issues and continuously improving verification testing coverage.

Job Requirement:

1. MS or above degree in EE/Engr. Physics or equivalent field.
2. Experience in engineering test processes (designing and automating, writing test plans and writing test reports).
3. Hands-on lab debugging/measuring skills using oscilloscopes, communication analyzers, logic analyzers, etc.
4. Prior programming experiences with scripting languages such as Python, Perl, etc.
5. Knowledge of Optical Communications Systems and Analog and Digital circuit is a plus.
6. Strong analytical and problem solving skills; excellent verbal and written communication skills.
7. Must be self-motivated, effective team player able to thrive in a fast-paced engineering environment.

Job Description:

1. This Test Engineer involves various aspects of verification of cutting-edge optical transceiver/transponders and its applications at system level.
2. Identify, define, write and execute test cases for comprehensive and effective module level performance validation. Various operation conditions will be covered such as interface environment, service disruption, etc.
3. Analyze test results, identify root cause, and actively make sound recommendations to resolve issues.
4. Automate test procedures and analysis tools.
5. Interfacing with Product Design, Field Application Engineering, and Quality teams to understanding customer specific application issues and continuously improving verification testing coverage.

Job Responsibilities:

1. Develop test software for the products which are designed in shanghai RD site or transfer from other Finisar R&D site.
2.Communicate with Finisar different sites to support test software on different platforms.
3.Do necessary data analysis to validate the test software and test station.
4.Do brain storming and initial studies to identify possible ways of test time reduction and low cost instruments for high volume manufacturing.
5.Participate in joint product test design and development efforts with other Finisar R&D sites.
Job Qualifications:

1.Bachelor degree with 2+ years working experience, or master degree with no working experience.
2.Major in Computer Science, Electronics or Telecommunication technology.
3.Good skill in English and ability to read and interpret complex engineering datasheet and specifications.
4.Good communication skills with internal and external.
5.Programming skills on C#, Python, VB.net are preferred. Experience on Microsoft Visual Studio is preferred.
6.Outgoing and optimistic.

Job Requirement:

1. Master degree or above in electrical engineering, or related discipline such as optics, communication, etc.
2. Work experience in high speed digital/analog electronics design/testing.
3. Expertise in the lab test, i.e. network analyzers, spectrum analyzers, TDRs, BERTs, scopes, etc.
4. Understanding in fiber optic transceiver design preferred.
5. Have analytical capability or experience and trouble shooting skills.

Job Description:

1. Work with design team and provide test support for prototype evaluation and validation. 2. Work with design team to define production test strategy and methodology. 3. Responsible for data analysis and refine the test specification to ensure high test yield with high confidence level. 4. Lead the failure analysis activities in NPI phase and implement the corrective actions for yield improvement and risk mitigation.

Job Requirement:

1. Master degree in electronic, communication engineering or CS.
2. Good understanding of circuit, fiber communication and related equips.
3. Basic skill in script/coding like VBA or Python.
4. Excellent communication ability to engage different function team, such as R&D, NPI, and Operations, have a strong service spirit.
5. Strong desire of accountability and ownership.
6. Fluent English speaking and writing.

Job Description:

1. Manage product cost, workflow and test spec.
2. Handle MiniPiP.
3. Responsible for data analysis to drive KPI upward.

Job Requirement:

1. Education: Master or above.
2. Subject: Physics, Optical Communications, Material Engineering, Semi-conductor.
3. CET4, Good communication skills both in English and Chinese.

Job Description:

1. Project technical leader for new OSA products transfer from design to mass production, to ensure that all new products meet specified requirements, the budget cost and the transfer timeline.
2. He/ She will be accountable for product validation, failure analysis, yield improvement, cost down activities, coordination and trouble shooting.

Job Requirement:

1. Master degree in electronic, communication or instrument and meter engineering.
2. Good understanding of analog and digital circuit. Experience in schematic and layout design and debug, familiar with the use of Oscilloscope, Spectrum Analyzer.
3. Skilled in CPLD/FPGA design.
4. Excellent communication ability to engage different function team, such as R&D, NPI, and Operations, have a strong service spirit.
5. Strong desire of accountability and ownership.
6. Fluent English speaking and writing.

Job Description:

1. Collect and clarify test requirement.
2. Develop test solution with test engineer.
3. Test eval board and instrument design, validation and continuous improvement.
4. Support test system set up and debug.
5. Support trouble shooting related to testing.

Job Requirement:

1. Bachelor degree or above.
2. Optical, Microelectronics, Material physics, Semiconductor Application, Automation and other related majors.
3. Familiar with MRSI, ASM, K&S, H&K etc. die bonding and bonding platform.
4. Familiar with semiconductor process.
5. Experience in high speed optical receiver TO-CAN package or Golden Box packaging process is preferred.
6. Good command of English in reading and writing.
7. Familiar with Solidworks, Office and quality tools DOE, SPC and other skills.
8. Honest and trustworthy, with strong sense of responsibility and dedication.

Job Description:

1. Responsible for optical receiving process and process optimization, improve the product first pass yield and HPU reduction.
2. In view of the technical problems, need to do design the experiment plan and follow up. Should be use the 8D report to do the analysis and be reviewed by the department's leader.
3. To track the experiment results and optimize the manufacturing process.
4. To responsible for quality control in product process, provide corresponding technical support for related departments like the quality RMA and customer application issues.
5. To operation of die bonding and wire bonding machines and develop customized tooling fixtures or equipment to optimize these commercial machines.
6. To receive and import new process platform, and will be responsible for buyoff and maintenance.
7. Write relevant technical documents of process documents and define the debug tree into system.
8. Write work instructions and instructing technical files. And give related technicians and operators training and certification.

Job Requirement:

1. Bachelor degree or above.
2. Optical, Testing and Control, Electronic Information and other related majors.
3. Responsible for photoelectric components product testing process formulation, optimization work;
4. English level 4 and above, strong hands-on ability.
5. Responsible for optical devices (TO-CAN, TOSA, BOSA, ROSA), optical chips (for example: DFB, PD, Tunable Laser) and other related products.
6. According to the specifications of optical devices, optical chips and testing plans, the test plan is analyzed and reconstructed.
7. Good command of English in reading and writing.
8. According to the test requirements of optical devices and optical chips, an automatic test scheme is designed, and a test script is written/modified.
9. Review test questions and test reports to assist in handling quality problems.
10. Familiar with RF, optical communication devices, optical chip field instrumentation principle, familiar with RF, optical communication devices, optical chip field test solutions;
11. Familiar with quality analysis tools such as DOE, SPC, JMP and other skills.
12. Honest and trustworthy, with strong sense of responsibility and dedication.

Job Description:

1. Responsible for optimizing optical receiving optical devices to increase the first pass yield and HPU reduction.
2. Track the test results of the products to do product analysis and work with the process engineer to improve the case, the exception of the case needs to be completed in the form of 8D report, and get the comments of the department's leader.
3. Responsible for quality control in product process, provide corresponding technical support for related departments like the quality RMA case and customer application issues.
4. Understand the testing principles and test condition/parameters, and then reduce the test hardware cost and test time optimization.
5. To receive and import new test platform, and be responsible for buy off and maintenance. Including the GRR study and SPC define.
6. Write relevant product test technical documents, including maintenance and product analysis documents.
7. Write work instructions and instructing technicians. And give related technicians and operators training and certification.

Job Requirement:

1.Bachelor degree or above majored in Mechanical design or related.
2.English: CET-4 or above. 3.Can use Solidworks to design/improve the fixtures preferred.
4.Good ability for Windows, Microsoft office.
5.Good at leaning, and team work.

Job Description:

1.Create and maintain the work instruction.
2.Process capability control and improvement.
3.Reduce the process cost and improve the process efficiency (Yeild, HPU).
4.Production trouble shooting and on-line support.
5.Do Failure analysis.
6.Train and certify technician and operator.
7.Design/Improve the fixtures to increase the efficiency and improve the quality Job.

Job Requirement:

1. Master or above, major in automation design or related majors.
2. Fast learner.
3. Be fluent on writing, reading and speaking English.
4. Good communication and presentation.
5. Smart working.

Job Description:

1. Working in Automation group for automated system software development, management, improvement, and production/RD support.
2. Duplicate, improve and update auto rigs on schedule, and mainly focus on software design, installation, tuning, debugging.
3. System integration between motion, vision and testing instruments etc.
4. Be familiar with the existing rigs, and identify and troubleshoot a wide range of complex SW issues.
5. Be responsible for documenting project’s files into EPDM and follow automation development process.

Job Requirement:

1. Master or above, major in automation design or related majors.
2. Fast learner.
3. Be fluent on writing, reading and speaking English.
4. Good communication and presentation.
5. Smart working.

Job Description:

1. Working in Automation group for automated system software development, management, improvement, and production/RD support.
2. Duplicate, improve and update auto rigs on schedule, and mainly focus on software design, installation, tuning, debugging.
3. System integration between motion, vision and testing instruments etc.
4. Be familiar with the existing rigs, and identify and troubleshoot a wide range of complex SW issues.
5. Be responsible for documenting project’s files into EPDM and follow automation development process.

Job Requirement:

1. Bachelor degree or above. Major in engineering, optoelectronics is preferred.
2. Good English communication in writing and good at oral.
3. Capable of working under pressure.
4. Open and aggressive characteristics.

Job Description:

1. Ownership of product quality for assigned product family.
2. Factory quality performance management including spec, criteria definition.
3. Ensure New Product Introductions meet quality & reliability requirements through phase exit reviews.
4. Perform data analysis to detect subtle trends and identify root causes to drive continuous improvement activities and increase Customer Satisfaction.
5. Cooperate with team to drive quality issues disposition and support RMA through a fault isolation, root cause, and corrective action process.
6. Constantly look for and identify systemic process improvements.
7. Training & education: delivery training / support certificate to inspection & operation team to secure satisfying build-in quality.

Job Requirement:

1. Be response for transferring globe OSA products process to Wuxi, including process setup and verification.
2. Be response for DFM, alignment process Yield&HPU improvement.
3. Be response for production document preparation, such as work instruction written, SPC definition.
4. Coach & certificate operator and technician.

Job Description:

1. Master degree in Physical, Optics or related engineering discipline
2. Good knowledge of basic optical design and theory.
3. Good oral and writing English, at least CET-6 English level.
4. Good hand on and strong practice and learning ability, self-motivated and good team worker.
5. Willing to travel oversea for globe projects transferring and supporting